Review Call for Participation

Tutorials, Workshops and Papers are solicited for both oral session and informal (poster) presentation from industry, government and academia (including students) covering relevant research, technologies, methodologies, tools and case studies.

For Papers, only original papers that have not been published or submitted for publication elsewhere will be considered.

NOTE: If you wish to provide an oral-only submission (not seeking publication) you can submit an “extended abstract” (2 pages) to the oral-only track.

Papers must be submitted via the Microsoft CMT.

 

How to Submit: Please review the guide provided in the links below if you do not have or used Microsoft CMT before.

Account Creation: https://cmt3.research.microsoft.com/docs/help/general/account-creation.html

Submission Instructions: https://cmt3.research.microsoft.com/docs/help/author/author-submission-form.html

Publisher: The Conference Proceedings will be submitted to IEEE Xplore®.

 

Terms and Conditions

Article Length: Papers (manuscript) must be from 4-8 pages inclusive. Abstracts for oral-only submission are 2 pages (“extended abstract”).

Number of Papers: Each author is allowed to present a maximum of two papers. If you have more than two papers accepted, you must register accompanying co-author(s) to present the additional papers.

Language: Papers must written in technical English.

No Show Policy: Papers will be published in the conference proceedings only if at least one of the authors is officially registered and the paper presented. IEEE reserves the right to exclude a paper from distribution after the conference (e.g., removal from IEEE Xplore) if the paper is not presented at the conference.

Registration: Authors must register for the conference and present their work.

  • Each full author registration covers a maximum of two papers (small fee for second paper).
  • Student registration will cover a single-paper final submission and presentation.

Authorization to publish: IEEE assumes that material presented at its conferences or submitted to its publications is properly available for general dissemination to the audiences these activities are organized to serve. It is the responsibility of the authors, not IEEE, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it. In order to ensure that the authors are aware of their responsibilities, signed IEEE Copyright Forms must be collected for all papers accepted for publication.

Plagiarism check: Each paper will be verified using plagiarism checking system(s) to ensure all referenced material is properly cited and not previously published.

Quality: IEEE reserves the right to withhold publishing of proceedings or papers that do not meet the IEEE quality standards.

Authors are requested to submit a paper. Oral-only submissions (no publication) require extended 2-page abstract.

 

Accepted and presented papers will be published in the conference proceedings. Content that meet IEEE quality standards will be submitted for inclusion in the IEEE Xplore Digital Library. Note that some papers may be accepted for informal presentation (using posters).

 

IEEE Conference Authors Open Access (OA) Publishing Requirements

There are two common forms of OA. The first, referred to as “Gold OA”, is an author‐pays approach. The author (Or author’s employer/funding agency) pays a charge to ensure that the final version of an article is made openly available to the public—that is, no subscription is needed to view the article. The second is “Green OA”. In this form of OA, an “as accepted for publication” (that is, not final) version of the article is self‐archived by the author in a public space, such as on a personal Web page or in an institutional repository. Conference authors may post their own versions of their papers as accepted by a conference, to comply with Green OA practice.

Overview: http://www.ieee.org/publications_standards/publications/rights/paperversionpolicy.html

Author FAQ: http://www.ieee.org/documents/author_version_faq.pdf

IEEE Policy: http://www.ieee.org/publications_standards/publications/rights/rights_policies.html

 

Review (and Final Paper) Submission Process

To submit an invited presentation without a paper, follow the steps below and as directed by the Program Committee.

There several steps to submitting your paper:

  1. Regular Paper or Oral-only Abstract Preparation: Prepare the content using the IEEE paper template (see Formatting below). For Regular papers submit 4-8 pages inclusive. For oral-only, submit a 2-page extended abstract for the reviewers.
  2. Author Registration: Register a “lead author” with (if the lead author is not already registered). The lead author will submit the abstract and later the full paper.
  3. Submission: Submit the paper or oral-only abstract  to the posted MIcrosoft CMT link.
    1. Provide paper title and summary content of the proposed paper.
    2. Add primary author name (use the checkbox “Add yourself as author” if you are indeed an author of the paper). You can add other authors later and you can change the order of authors.
    3. Enter Keywords.
    4. Select the topic(s) with which your paper corresponds.
    5. Submit, this will lead to a page that acknowledges your paper’s registration and allows you to add authors. A confirmation e-mail will be sent to you.
    6. Upload PDF of your paper or abstract. NOTE: PDF/A format is required.
    7. To upload your paper right after registering your submission, simply follow the instructions on the acknowledgement page.
  4. Review/Final Paper Manuscript Submission: When your Review Paper (or Oral-only abstract) has been accepted by the Program Committee you will receive an email. When your Final paper is ready, login and upload your full paper in PDF. You may upload any number of times until the deadline. If you encounter any warning or errors, see the Formatting section below.

Please contact the Program Committee if you have any questions about submitting your manuscript or oral-only abstract.

Manuscript Preparation

Be certain to add all authors in Microsoft CMT during the submission process. Fail to comply with this rule and your paper may be withdrawn from the review process. Once reviewed, the listing of authors connected to the paper cannot be changed by the authors in the final manuscript.

Final Paper Preparation

IEEE now requires that Conference papers classified as ‘original-research’ material must have premise/process/outcome/conclusion structure [as described below]:

  • Premise (hypothesis): A description of the problem being addressed, and the basic idea to address it. For an applications article, this would be a description of what the application was designed to do.
  • Process (experiments): A description of what the authors actually did.  For an application article, this would be the detail of the application itself; for a design article, the thought process that went in to the design.
  • Outcome (results): What the experiment produced, or how the application performed, or the final design (for a design article).
  • Conclusion: A summary of the lessons learned from the paper.

 

Formatting

For information on formatting your submission you can refer to the IEEE Author Digital Toolbox at http://ieeeauthorcenter.ieee.org/ and the IEEE Manuscript Templates for Conference Proceedings at http://www.ieee.org/go/conferencepublishing/templates which has standard IEEE Transactions templates for Microsoft Word or LaTeX formats. NOTE: any copyright footer included on the first page must be removed.

The format for the oral-only abstracts and full papers (aka manuscript) must satisfy the following requirements:

  • Manuscript must be in English
  • The manuscript must follow IEEE two-column format (see templates) with single-spaced, ten-point font in the text. The minimum full paper manuscript length is four (4) and the maximum length is eight (8) pages. Papers longer than eight pages will not be accepted for publication. All figures, tables, references, etc. are included in the page limit.
  • The order of the authors in the paper must match the order of the authors in the paper registration.
  • Authors MUST submit their papers electronically using EDAS as described above.
  • Papers must not have a copyright footer on page 1.
  • Papers must be submitted in Portable Document Format (PDF) format.
  • All fonts must be embedded in the PDF file (in Word, create the PDF with “ISO 19005-1 compliant (PDF/A)” option). For MACs use ‘Print to PDF’ process. Or use an online converter such as: https://www.pdfforge.org/online/en/pdf-to-pdfa.
  • No Bookmarks.
  • No hyperlinks. [In Word to remove all hyperlinks in a document, press CTRL+A to select the entire document and then press CTRL+SHIFT+F9.] In some latest versions of Word, internal hyperlinks are added for each footnote; try to disable this feature.
  • If there are puzzling margin issues from EDAS, it may be due to the version of Word; go to the Page Layout, Margins and set the left and right margins to 0.62 and save (OK). This may correct the problem.

 

Review Process

iGET uses this process for regular paper reviews: review paper then final manuscript.

By using the template, it is easier to develop the paper. The papers (‘review manuscript’, up to 8 pages) are reviewed as required by IEEE and the authors will be notified.

Assuming the review papers meet IEEE requirements, there are three acceptance options:

  • accepted – the paper is considered ‘final’ (no further edit required), authors need to file their copyright and register and plan to attend and present. If they do want to update their paper, they can do so (‘final manuscript’).
  • accepted with minor revisions – a final version of the review paper with revisions as noted by the review comments is needed.
  • accepted with major revision – the review paper has some serious shortcomings or quality issues, and a final version with revisions as noted by the reviewers is required.

Note: When the final paper (‘final manuscript’) is uploaded, the authors must file their copyright. We will check the final paper to ensure that the noted issues were addressed. Then the author(s) register and plan to attend and present.

 

Copyright

Signed IEEE Copyright Forms must be collected for all papers and oral-only abstracts included in the attendee proceedings. Failure to file the copyright will exclude the paper from the proceedings. Copyright is collected when the final paper is uploaded or after the review paper is accepted without further revision.

SusTech has enabled the EDAS IEEE eCopyright function (ECF). With ECF, authors are redirected to an IEEE web site and fill in the IEEE copyright form on the web. The ECF then reports completion of the web form to EDAS, allowing the author to upload the form. Thus, authors do not have to print, fill out and upload copyright forms manually.

Authors of accepted papers can submit copyright forms via the (c) link in the ‘My Papers’ tab, as shown below.

 

A link can also be found on each paper page.

If you are an author that requires using a third-party agreement based on your employment or funding, please email copyrights@ieee.org supplying the paper title, conference name, the EDAS paper ID, and a copy of the signed agreement.

Details regarding IEEE copyright can be found here. See ieee.org/copyright for full references.

Paper amendments

Authors can amend their submissions online up until the submission deadline. Login to your account and you can upload a new PDF.

If you are unable to submit your paper online, please email the Program Committee by this form or telephone to 1-503-612-9397 (US).

Guidelines for submitting your paper

  • Formatting must comply with the stated requirements (see IEEE template).
  • Authors must complete the IEEE Copyright Assignment form.
  • All papers must be checked for plagiarism.
  • All papers must be PDF verified, either with the paper processing system, or through the IEEE PDF eXpress system before submission.

 

Using IEEE PDF eXpress

Please use this URL  ieee-pdf-express.org, most likely you will need to create an account even if a previous user. If there is a problem, contact PDFsupport@ieee.org.

We encourage authors to check their papers for IEEE SusTech 2026 using the IEEE PDF eXpress system http://ieee-pdf-express.org before they are submitted to the conference in EDAS. Here are the basic instructions for using PDF eXpress:

  • First-time users: Go to ieee-pdf-express.org. Select “New Users – Click Here“, then enter your email address and a memorable password, and the Conference ID .
  • Previous users: Go to ieee-pdf-express.org. Enter the Conference ID, your email address, and enter the password you used for your old account. When you click “Login“, you’ll receive an error saying you need to set up an account. Simply click “Continue“. By entering your previously used email address and password combination, you will enable your old account for access to the SusTech conference.
  • You will receive online and email confirmation of successful account setup.
  • For each conference paper, click “Create New Title“.
  • Enter identifying text for the paper (title is recommended).
  • Click “Submit PDF for checking” or “Submit Source Files for Conversion“.
  • Indicate platform, source file type (if applicable), click “Browse” and navigate to file, and click “Upload File“. You will receive online and email confirmation of successful upload.
  • You will receive an email with your Checked PDF or the IEEE PDF eXpress-converted PDF attached. If you submitted a PDF for Checking, the email will show if your file passed or failed.
  • If your PDF submitted fails the check: Submit your source file again by clicking “Try again“, Read the PDF Check Report, then click “The PDF Check Report” in the sidebar to get information on possible solutions, or Request Technical Help through your account.
  • If you are not satisfied with the IEEE PDF eXpress-converted PDF: Resubmit your source file with corrections by clicking “Try again“, or if that fails, “Request a Manual Conversion“through your account.
  • If the PDF submitted passed the check: If the PDF passed, or you are satisfied with your IEEE PDF eXpress-converted PDF, submit your IEEE Xplore compatible PDF using the Submission Process above.

For questions regarding PDF eXpress, you can contact the IEEE Publications Support Center or pdfsupport@ieee.org. Please ensure to quote your PDF eXpress abstract ID in all correspondence.

 

Questions

Please see the IEEE Author Center for information on publishing with IEEE; guidance and best practices on the IEEE conference publishing process can be found here.

If you need a travel Visa for the United States, email isayan@ieee.org.

 

Guidelines for Presentation and Recording

Official Language: The official language of the conference is English.

All presentation including discussion and submissions shall be made in English.

 

Instruction for Remote Oral Presentations: As a hybrid conference, all remote presentations will be pre-recorded by the presenter and uploaded to a designated repository one month before the conference start date. See instructions below.

The conference itself will run on October 21-25, 2026 in parallel sessions chaired with live introductions and Q&A.

Sessions will be streamed and recorded.

NOTE: iGET intends to host the recorded presentations later on IEEE.tv.

 

Duration for each category of oral presentation are listed below:

  • Workshops will be LIVE
  • Plenary Talks are LIVE
  • Regular (author) Talks are scheduled for 15 minutes (including 3-5 minutes of Q&A).
  • Panelist who provide a recording are 3-10 minutes.
  • Student Poster Contestants who provide a 7 minute (max) recording and a PDF of their poster no larger than 36”x48”, using form link to be provided. 

 

Plenary speakers and Panelists: the conference committee will provide instructions for you regarding submitting your remote recording if applicable.

Guidelines for Preparing Recordings

Remote Authors please use the following guidelines for preparing your video for uploading using Zoom MP4. 

NOTE: Zoom generated MP4 are compact; PPT MP4s can be very large.

Authors Duration: 10-12 minutes (including 3-5 minutes for LIVE Q&A with attendees)

Posters Duration: up to 7 minutes recording

File size limit: 100MB file

File format: MP4

Aspect ratio: 16:9

Please use the iGET Template for your slides.

 

Follow the instructions below to create the recording file.

The presenting author(s) will upload their MP4 video into EDAS under “Recording”.

Other presenters (e.g. Student Posters) will receive a link to a Form to upload their video.

Please start early: given that the resulting video files can be very large, they might need a long time to transfer, and you might not be able to upload them in time if you start late.

Please play the recording after you make it to verify the audio quality. Check the microphone setup. We recommend a headset, so you won’t get laptop fan noise etc. Also be in a quiet location – a coffee shop is not appropriate. We will preview the recording for quality and ask you to re-record if necessary.

Instructions for Recording

The easiest way to prepare your presentation video will be to subscribe to the free version of Zoom and use it to record your presentation video. A 20 minute presentation should be well below 100MB. See video instructions below.

 

PPT Export Video

Alternately, you can use another software to create a recording of your presentation in MP4. Note if you use Voice-over-PowerPoint (available in PowerPoint 2016 & later) and create a PPTSX file, Export it to MP4. The MP4 generated by PPT is typically enormously large (vs Zoom et al) and will likely need to be compressed to meet the size limit of 100MB for author uploads. Be sure to verify that the audio is included as there have been problems with PPT recordings. See the Microsoft support article here.

Please check the recording for quality and understandability, and for timing, as it needs to fit into the specified duration. We recommend using a headset, so you won’t get laptop fan noise etc. in the recording.

 

Submission: Microsoft CMT Submissions Link